Jump to content
Sign in to follow this  
lamoe

Refrigerants not required: Flexible metal cooling prototype demonstrates extreme efficiency

Recommended Posts

lamoe

 

Quote

 

https://newatlas.com/shape-memory-alloy-nitinol-heating-cooling/58837/

A German research team has prototyped an extraordinary heating/cooling system that stresses and unloads nickel-titanium "muscle wires" to create heated and cooled air at twice the efficiency of a heat pump or three times the efficiency of an air conditioner. Crucially, the device also uses no refrigerant gases, meaning it's a much more environmentally friendly way to heat or cool a space.

The device is based on a peculiar property of certain shape-memory metal alloys that spring back into shape after being deformed. In some cases – particularly with nickel-titanium, also known as nitinol – these metals absorb significant amounts of heat when they're bent out of shape, and then release that heat when they're allowed to revert to their normal shape. The difference between the loaded wire and the released wire can be as much as 20° C (36° F).

The cooling device is thus quite simple in concept. It uses a rotating cylinder covered in nitinol wire bundles. The wires are loaded up as they pass through one side, sucking heat out of the air and storing it up. Then as they rotate past the other side, they're allowed to snap back into shape, dumping the heat on the second side. Air is blown through chambers on each side, giving you one feed of heated air and another feed of cool air.

ADVERTISING

The Saarland University team has been experimenting with the device to figure out the optimal convergence of wire loading, rotational speed, and how many wires should be in a bundle to create the biggest possible heat differential between the two sides from a given energy input.

And the results seem very exciting. The Saarland University team claims that "the heating or cooling power of the system is up to thirty times greater than the mechanical power required to load and unload the alloy wire bundles" depending on the type of alloy used. They say that this makes their new system more than twice as good as a conventional heat pump and three times as good as a conventional refrigerator.

"Our new technology is also environmentally friendly and does not harm the climate, as the heat transfer mechanism does not use liquids or vapors," says Professor Stefan Seelecke, the university's Chairman of Intelligent Metal Systems. "So the air in an air-conditioning system can be cooled directly without the need for an intermediate heat exchanger, and we don't have to use leak-free, high-pressure piping."

The idea of achieving an air cooling or heating effect simply by bending and unbending little pieces of metal sounds bizarre. What about metal fatigue? How long will those alloy wires last in these variable temperature environments before they get brittle and break off?

Well, that's one area where nitinol is very different from other metals. Indeed, it's most famous for its use in medical devices, particularly implantable ones such as stents, where its remarkable flexibility allows a stent to bend, crush, stretch and twist with the artery as the body moves.

Verdict Medical Devices summed up nitinol's fatigue properties thus: "it is by far the most resistant metal known to high-amplitude strain-controlled fatigue environments. Several applications … employ nitinol solely because of its extraordinary fatigue resistance."

The cooling device described above would appear to fit the description of a high-amplitude, strain-controlled application. But, of course, it'll be up to the researchers, or a future commercial team, to demonstrate how long you can expect your nitinol reverse cycle air conditioner to last.

It certainly looks like an exciting piece of technology, with the capability to reduce energy use in heating/cooling as well as taking refrigerant gases out of the equation.

Source: Saarland University

 

 

  • Like 3

Share this post


Link to post
Share on other sites
SkyMan

Cool. 

Share this post


Link to post
Share on other sites
Ozepete

This should be good for a decent scam lump of funding from the dumb arsed 'warm and fuzzy!!  Seen this sort of stuff many times including two guys in the US who got large grants for 'cooling milk with THEIR invention which was nothing more than a peltier system... www.promethean-power.com (Peltier refrigeration was invented before their grandmothers were born, the most inefficient refrigeration method ever, and this NEW method looks like a derivative) .. But they get the big dollars, 100k in one lump from one university alone. :scratch_head:  

  • Like 1

Share this post


Link to post
Share on other sites
Jester

Bunch of years ago they came out with some gizmo that would cool a can of pop when you opened it. People invested heavily in it.  My neighbor Henry recognized it for a scam and sold the stock short.  When the company failed he made a killing. 

There is another one going on for the last few years with a portable personal air conditioner. 

Share this post


Link to post
Share on other sites
SkyMan
20 minutes ago, Jester said:

Bunch of years ago they came out with some gizmo that would cool a can of pop when you opened it.

It worked but I don't see how anyone would think that would be cost effective enough for people to pay extra for it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..