Jump to content
Sign in to follow this  
RogerDat

Dual Battery Systems - was: Facebook engineers...

Recommended Posts

RogerDat

TequilaSunset

Can you elaborate on the battery's you use, and the chargers? Sounds like they are similar to my UPS / light setup.

"running dual aux batteries"

 

@TequilaSunset

Edited by Paul

Share this post


Link to post
Share on other sites
Paul
3 minutes ago, RogerDat said:

Can you elaborate on the battery's you use, and the chargers? Sounds like they are similar to my UPS / light setup.

Probably a high output alternator and a battery isolator, or heavy diodes.

Share this post


Link to post
Share on other sites
TequilaSunset
2 hours ago, RogerDat said:

TequilaSunset

Can you elaborate on the battery's you use, and the chargers? Sounds like they are similar to my UPS / light setup.

"running dual aux batteries"

 

@TequilaSunset

I figured it would be easier to show you than write it out. Here is a basic diagram that pretty much fits what my set up looks like, except I have 2 batteries in series. The solenoid prevents from draining the starter battery. I did not upgrade the alternator. I have 2 outlets wired inside... never failed me yet, but if I ever plane on some long term living in my vanagon, I will add solar. I have a 1,200 W inverter too, and a shore power plug on the outside that I use for civilized camp grounds :)

I hope this helps... 

Simple-dual-battery-setup-L.jpg

unnamed (5).jpg

  • Like 1

Share this post


Link to post
Share on other sites
Paul

@TequilaSunset, @RogerDat,

You can also go with either a dual / triple battery isolator, or large diodes, which is what is built into an isolator. They just add a heat sink to the diodes to help dissipate the heat. 

Dual Battery Isolator

s-l500.jpg

 

Battery Isolating Diode

85hf60_Medium.jpg

  • Like 1

Share this post


Link to post
Share on other sites
Mikala

I looked at putting in a dual battery bank in my old Unimog years back and I remember that the setup involved having isolated battery banks, due to their differing sizes. It's the same way with industrial battery banks, except with most vehicles, there might be just 1 primary battery and 1 secondary battery. The setup I was looking at had 1 primary battery, but 4 backup batteries in a bank attached to the frame behind the cab.

Problems arise though when the batteries are not exactly equal (one might be identical, yet not be as strong as the other). Then your battery charging will encounter difficulties in keeping the batteries charged correctly.

My suggestion is to isolate the primary battery (bank) from the secondary battery (bank) and then charge them as individual batteries.

  • Like 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..